7.9 Doorphone [9]

7.9.1 Ringing & Door Opener [9-1]

Settings for receiving doorphone calls and accessing door openers can be programmed. A maximum of 4 doorphones/door openers can be connected to the PBX.

Doorphone

The settings for receiving doorphone calls can be programmed for each extension.

Jack

Indicates the jack number (reference only).

Value Range

01–24

Extension

Indicates the extension number and name (reference only).

Value Range

Extension no. and name specified in Ext. no. and Name on the 7.1.3 Numbering Plan [1-3] screen

Doorphone 1–4—Day, Night, Lunch

Enables doorphone call reception in each time service mode.

Value Range

On (checked), Off (unchecked)

Feature Guide References

• 1.15.1 Doorphone Call
• Doorphone Ringing—Day/Night/Lunch [700-702]

Door Opener

The settings for unlocking the door can be programmed for each extension.

Jack

Indicates the jack number (reference only).

Value Range

01–24

Extension

Indicates the extension number and name (reference only).

Value Range

Extension no. and name specified in Ext. no. and Name on the 7.1.3 Numbering Plan [1-3] screen

Door Opener 1–4—Day, Night, Lunch

Enables door opening in each time service mode.

Value Range

On (checked), Off (unchecked)

Feature Guide References

• 1.15.2 Door Open
• Door Opener—Day/Night/Lunch [703-705]

7.9.2 Others [9-2]

Other settings can be programmed for each doorphone. A maximum of 4 doorbell/door chimes can be connected to the PBX. Each doorphone can have one doorbell/door chime assigned to it.

Doorphone Ring Tone Pattern—Door 1–4

Selects the ring tone pattern for incoming doorphone calls.

Value Range

Single, Double, Triple, S-Double

Feature Guide References

• 1.1.3.3 Ring Tone Pattern Selection
• 1.15.1 Doorphone Call
• Doorphone Ring Tone Pattern [706]

Doorphone Access Tone—Door 1–4

Selects whether the PBX sends a doorphone access tone to a monitored doorphone before monitoring starts.

Value Range

On (checked), Off (unchecked)

Feature Guide References

• 1.10.2 Room Monitor
• 1.15.1 Doorphone Call
• Doorphone Access Tone [707]

Doorphone Ring Time—Door 1–4

Selects the length of time until the ringing stops and the call is cancelled when there is no answer.

Value Range

15 s, 30 s

Feature Guide References

• 1.15.1 Doorphone Call
• Doorphone Ring Time [708]

Door Open Duration—Door 1–4

Specifies the length of time the door stays unlocked.

Value Range

1–8 s

Feature Guide References

• 1.15.2 Door Open
• Door Open Duration [709]

Doorphone Ring / Chime—Door 1–4

Selects whether doorphone calls ring at extensions or at dedicated door chimes.

Value Range

Ring, Chime, Ring & Chime

Feature Guide References

• 1.15.3 Doorbell/Door Chime
• Doorphone Ring/Chime [710]

Doorphone Chime Assignment—Door 1–4

Selects the relay to which a doorbell or a door chime is connected.
A relay not connected to a door opener should be selected. This setting is active only when Chime or Ring & Chime is selected in Doorphone Ring / Chime—Door 1–4 on this screen.

Value Range

Relay 1–4

Feature Guide References

• 1.15.3 Doorbell/Door Chime
• Doorphone Chime Assignment [711]

Doorphone Chime Pattern—Door 1–4

Selects the doorphone chime pattern for incoming doorphone calls. Chime patterns 1-4 are played only one time during the doorphone ringing time.

Value Range

Pattern 1–8

Feature Guide References

• 1.15.3 Doorbell/Door Chime
• 4.2.1 Tones/Ring Tones
• Doorphone Chime Pattern [712]